Replacement Parts
Model downloaden
Cooler Divider / Cutting Board
38
Downloads
37
Likes
0
Makes
There are slots in the cooler. Great! Can one find or buy a divider / cutting board to fit this Coleman Excursion 9 Quart Cooler Model 6209? No, one cannot. A few minutes with some rulers, calipers, measures, and Fusion 360; then a bit over 4 hours for the printer, and... "Voilá!" I now have a serviceable divider and cutting board that fits in the cooler.
Divider is 6mm thick, 162mm tall, and tapers from 180mm to 184mm wide.
Super simple. Designed to fit in the slot (which, btw, narrows both in width and depth), allow for full width for fitting anything above the shelf edges, and will fit as a horizontal shelf if want full width across the bottom.
PETG is material of choice for durability, and is same category as PET water bottles / food containers. PLA should also work just fine, and is also "generally recognized as safe when used in contact with food*."
*different colorants may introduce toxic chemicals. If concerned, lookup the Material Safety Data Sheet for your
Divider is 6mm thick, 162mm tall, and tapers from 180mm to 184mm wide.
Super simple. Designed to fit in the slot (which, btw, narrows both in width and depth), allow for full width for fitting anything above the shelf edges, and will fit as a horizontal shelf if want full width across the bottom.
PETG is material of choice for durability, and is same category as PET water bottles / food containers. PLA should also work just fine, and is also "generally recognized as safe when used in contact with food*."
*different colorants may introduce toxic chemicals. If concerned, lookup the Material Safety Data Sheet for your
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
