Thingiverse
Cooling for Micron3DP Cobra
par samu_87
8
Téléchargements
7
Likes
0
Makes
After a lot of test i had made this cooling fan duct for Micron 3DP!!!
It's compatible with fast nozzles, the nozzles longer than the standard.
I made 2 option, the difference between two files are only in the mounting.
The more standard option is the PlateMount and you must drill the 2 holes in the right position.
The other file is designed to fix the cooler at a pice of aluminum that i made myself, i add the STL file called fan_mount; you can print it better if ABS or PETG or HIPS with a infill more than 50% otherwise you can engrave in a pice of aluminium like in the photos.
You need a 50x50x15 radial fan, i fix the fan with a bit of hot glue.
If you have question and issues with this write a message and asap i will fix.
A big thanks to Arik Eran and all Micron3DP staff! Also Thanks to lamerhouse!
It's compatible with fast nozzles, the nozzles longer than the standard.
I made 2 option, the difference between two files are only in the mounting.
The more standard option is the PlateMount and you must drill the 2 holes in the right position.
The other file is designed to fix the cooler at a pice of aluminum that i made myself, i add the STL file called fan_mount; you can print it better if ABS or PETG or HIPS with a infill more than 50% otherwise you can engrave in a pice of aluminium like in the photos.
You need a 50x50x15 radial fan, i fix the fan with a bit of hot glue.
If you have question and issues with this write a message and asap i will fix.
A big thanks to Arik Eran and all Micron3DP staff! Also Thanks to lamerhouse!
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !