CoPrint Unicorn Nozzle Adaptation

UPDATE(03/16/2026): COMPLETE! Instructions have been updated for securing the nozzle as detailed below in the previous update. This proves much better and the ceramic spacers have been removed from the instructions. All part variations for the K1 and K2 nozzles have been updated and uploaded to their latest versions. (Backplates are still included but the recommended method is to use the sensor clamps (K1/K2 Clamp_BTT EDDY work for both stock and eddy sensors) and the stock backplate for better stability. REMEMBER to re-measure your X and Y sensor offsets!)

UPDATE(11/04/2025): Almost complete. Been working and testing. Instructions still W.I.P, but IMPORTANT for any having heat creep issues, drill and tap the aluminum tube that is inserted into the heatsink with a 2.5mm drill bit and a M3 tap so you can secure a M3 grub screw/M3 screw to thermocouple the nozzle heatsink area to the printhead heatsink. The Nitride/thermal paste is hit or miss for fixing the air gap so physical connec