Thingiverse
COR Strainer with BSPP threads
von garbled
74
Downloads
40
Likes
0
Makes
The original strainer is great, but a complete nightmare to print with supports.
This tries to solve that, in addition, I replaced the 1" inlet, with a 1.5" BSPP thread. Now the strainer simply screws onto the pump, and you are done.
I printed mine in PETG, 100% infill. Supports *touching the build plate*. If you enable normal supports, it's impossible to get extracted. Additionally, I had to turn my retractions way down, or the extruder would break my filament with all the retractions on this thing. Print it screw side down.
I also included a mod_1 version, which doesn't have the BSPP threads, and just has a ring that fits over the COR input. In case you want that.
This tries to solve that, in addition, I replaced the 1" inlet, with a 1.5" BSPP thread. Now the strainer simply screws onto the pump, and you are done.
I printed mine in PETG, 100% infill. Supports *touching the build plate*. If you enable normal supports, it's impossible to get extracted. Additionally, I had to turn my retractions way down, or the extruder would break my filament with all the retractions on this thing. Print it screw side down.
I also included a mod_1 version, which doesn't have the BSPP threads, and just has a ring that fits over the COR input. In case you want that.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!