Thingiverse
Cord Lock
von cooasty
95
Downloads
66
Likes
2
Makes
Cord Lock
Designed for use with a ball point pen spring. Any small spring diameter up to 5 mm will work.
V2 will accommodate spring diameters from 5.1 mm to 8 mm & has a shorter body.
Printed nicely at 30% speed with 0.2 mm layers. 20% speed when printing single pieces.
I used a 5 mm bit to clean small holes & 8 mm bit on the button hole. Small screwdriver for inside body. Emery cloth on the button. A little glue at the base will keep things
together,
Where are you from?
Designed for use with a ball point pen spring. Any small spring diameter up to 5 mm will work.
V2 will accommodate spring diameters from 5.1 mm to 8 mm & has a shorter body.
Printed nicely at 30% speed with 0.2 mm layers. 20% speed when printing single pieces.
I used a 5 mm bit to clean small holes & 8 mm bit on the button hole. Small screwdriver for inside body. Emery cloth on the button. A little glue at the base will keep things
together,
Where are you from?
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
