Core A8 Modular Bed Mount

As of 2020, I am no longer developing this model. The Fusion 360 file has been attached. Feel feel to modify it, just don't forget to mark it as a remix.

This was initially meant to be a four linear rod upgrade for the Core A8 printer. It ended up being a modular design that can be used however you want.

All parts are meant to be printed without supports.

You will need to purchase two more Z rods, some 40mm M3 screws, various other M3 screws/nuts that I am sure you have laying around and some 1/2 inch aluminum C channel.

Print Quantaties:
2x - Bed_Mount_A_1.stl
6x - Bed_Mount_Cap.stl
2x - Bed_Mount_B_2.stl
2x - Motor_Mount_Cap.stl
2x - Bed_Mount_B_1.stl
2x - Bed_Mount_A_2.stl
2x - Bed_Mount_Lead_Nut.stl
2x - Motor_Mount.stl
8x - Rod_Mount_Cap.stl
8x - Rod_Mount.stl

I went with the 1/2 inch aluminum C channel as it is available in most home improvement stores here in the US. It is really cheap stuff. You could also use 1/2 square tube, but it is not