Corgi Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA Overture Matte Black Transmission Distance: 0.1 PLA Elegoo Blue Transmission Distance: 2.7 PLA BambuLab Basic Red Transmission Distance: 4 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA Overture Matte White Transmission Distance: 3.7This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue At layer #7 (0.64mm) swap to Red At layer #8 (0.72mm) swap to Sunrise Orange At layer #14 (1.2mm) swap to Savannah Yellow At layer #16 (1.36mm) swap to White for the rest.