corgi hueforge

enjoy!!!!! 7 colors just swap blk when its done blue,green with other colors when done make sure u put blue on black on objects and so onPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA Generic Black Transmission Distance: 0.2 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic BambuLa