Thingiverse
Corner Bracket Cover
di da_syggy
7
Download
10
Likes
0
Makes
Corner bracket cover for 25mm x 50mm corner brackets.
The wall bars we mounted for our kids came without covers for the wall mounting brackets.
Fortunately the screws were centered and not offset, so I used slightly larger screws with a 10mm head that stick out a bit and designed a bracket that slides over the screwheads.
I recommend using strong materials like petg. The wood PLA I used is quite brittle and breaks easily.
The wall bars we mounted for our kids came without covers for the wall mounting brackets.
Fortunately the screws were centered and not offset, so I used slightly larger screws with a 10mm head that stick out a bit and designed a bracket that slides over the screwheads.
I recommend using strong materials like petg. The wood PLA I used is quite brittle and breaks easily.
da_syggy pubblica anche su
3 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
