Thingiverse
Corner clamp
1.7k
Downloads
1.1k
Likes
3
Makes
A small corner clamp for joining pieces up to 15mm in thickness.
It requires two M5x50mm screws and two M3x4mm set screws on the thumbwheels. Alternatively the jaws can be tightened with an Allen key from the inside of the corner angle.
The end of the screw needs to be flattened so that the setscrew can fix the thumbwheel, the hole for the setscrew needs to be tapped, or alternatively the thumbwheel can be glued in place.
It may be necessary to drill the holes for the screws to 5 or 5.5 mm to make things run more smoothly.
It requires two M5x50mm screws and two M3x4mm set screws on the thumbwheels. Alternatively the jaws can be tightened with an Allen key from the inside of the corner angle.
The end of the screw needs to be flattened so that the setscrew can fix the thumbwheel, the hole for the setscrew needs to be tapped, or alternatively the thumbwheel can be glued in place.
It may be necessary to drill the holes for the screws to 5 or 5.5 mm to make things run more smoothly.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!