Corvette Stingray Hueforge

Project: Stingray.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mmFilaments Used: #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #41273b PLA Paramount 3D Decepticon Purple Transmission Distance: 1.8 #20731a PLA Sunlu Olive Green Transmission Distance: 0.5 #81312f PLA Paramount 3D Hannibal Red Transmission Distance: 3 #0078bf PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 #db3e14 PLA PolyTerra Muted Red Transmission Distance: 1 #f0be02 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 #e6dede PLA Overture Matte White Transmission Distance: 3.7This print uses 8 unique filamentsSwap Instructions: Start with Charcoal At layer #18 (0.84mm) swap to Decepticon Purple At layer #21 (0.96mm) swap to Olive Green At layer #23 (1.04mm) swap to Hannibal Red At laye