Coster set3 - cats

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 95x95mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Black Transmission Distance: 0.3 PLA Gray Dark Transmission Distance: 2.5 PLA Red Transmission Distance: 4 PLA Gray Transmission Distance: 3 PLA White Transmission Distance: 6This print uses 5 unique filaments !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Gray Dark At layer #9 (0.8mm) swap to Red At layer #17 (1.44mm) swap to Gray At layer #24 (2mm) swap to White for the rest.