Thingiverse
Cover cam mount
von touchthebitum
3
Downloads
1
Likes
0
Makes
Protective camera mount for the Kakute AIO flight controller and Runcam Swift 2. (holes : 30.5x30.5mm)
It should fit the Runcam Eagle Pro 2
You'll need longer screws to mount your camera.
Not tested yet
8.01.2018 I had to modify the stl file because there was a small contact between camera and top of the case. See the yellow case with the Runcam Eagle Pro 2. I just have to control if the field of view is free from the case...
9.01.2018 I tried both resolutions : 16:9 and 4:3 4:3 is ok 16:9 is ok if you enable zoom in the camera settings fo your Runcam because borders slightly appear in the field of view.
22/01/2018 I added 4 holes on the top to make mounting process easier.
2/02/2018 Here is the link for the frame : https://www.thingiverse.com/thing:2596317
I tested and flies well ;)
It should fit the Runcam Eagle Pro 2
You'll need longer screws to mount your camera.
Not tested yet
8.01.2018 I had to modify the stl file because there was a small contact between camera and top of the case. See the yellow case with the Runcam Eagle Pro 2. I just have to control if the field of view is free from the case...
9.01.2018 I tried both resolutions : 16:9 and 4:3 4:3 is ok 16:9 is ok if you enable zoom in the camera settings fo your Runcam because borders slightly appear in the field of view.
22/01/2018 I added 4 holes on the top to make mounting process easier.
2/02/2018 Here is the link for the frame : https://www.thingiverse.com/thing:2596317
I tested and flies well ;)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!