Cow head ~ Hueforge

This Hueforge is made from a picture I took of a cow in the Achterhoek, the Netherlands. Hueforge instructions below. If you rather use black and white, I would suggest going for black - dark grey - light grey - white. If you do want to use browns, but don't have four different browns, you can either do dark brown - middle brown - middle brown - beige (skipping the swap at layer 13) or dark brown - middle brown - middle brown - white. Enjoy printing :) Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 183.05x183.05mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mm Filaments Used: #4d3324 PLA BambuLab Matte Dark Chocolate Transmission Distance: 0.1 #7d6556 PLA BambuLab Matte Dark Brown Transmission Distance: 2 #d3b7a7 PLA BambuLab Matte Latte Brown Transmission Distance: 2 #e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8 Swap Instruc