Cowboy Thought

Project: Cowboy.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is 160x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.52mmThe Max allowed Thickness is 2.28mm and the Actual Thickness is 2.28mm Filaments Used:#080a0d PLA PolyLite Black Transmission Distance: 0.3#4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8#e2dedb PLA PolyLite White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.68mm) swap to Blue GrayAt layer #13 (1.16mm) swap to BeigeAt layer #24 (2.04mm) swap to White for the rest.