Cozy Workshop - Hueforge

This is 5 colour Hueforge of Cozy Workshop. I uploaded two sizes 200x200 X1/P1/A1 and size 180x180 for A1 Mini.And thinner version with border size 200x200. Swap instructions in profile description.And a profile with pause during 3rd colour (brown) for changing spool for 5th colour.Guide for printing more than 4 colours with single AMS down below instructions.Do not adjust the thickness (Z) in your slicer!! The layers will not come out right. You can adjust the other dimensions (X,Y) though to make it bigger or smaller, just not the thickness. Boost MeI print all of my creations myself.If you like my work, pls send me a boost, it will help me make more.Thank you. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.72mmThe Max Depth is 2.4mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Tra