Thingiverse

CPAP Hose Support

by jpitz3131

21 Downloads

12 Likes

0 Makes

Designed in Fusion 360, .3mf file included. CPAP Hose support. Printed in PLA, but any filament type can be used.

When sleeping my hose would keep on falling down and waking me up. Support is placed above the headboard of my bed. I can easily arrange the hose for various conditions.

No supports are required. Just over 6 hours to print, uses almost 22 meters of filament.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

6 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does CPAP Hose Support need supports when printing?

No supports needed for CPAP Hose Support — it's designed to print clean off the bed.

How long does it take to print CPAP Hose Support?

According to the design notes, CPAP Hose Support takes approximately 6 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is CPAP Hose Support available in?

CPAP Hose Support is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is CPAP Hose Support free to download?

Yes, CPAP Hose Support is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

CPAP Hose Support

Similar Models

Add to Collection