CR-10 Bed Level Test

This is the best and most easy way to level the Hotbed for Printing...

See the hole Process @ https://www.youtube.com/watch?v=GPd0UuvIyA8&feature=youtu.be

It will print a grid of 2 perimeter lines on the Bed.
If you lower the Printing speed for first layer to 30-45mm/s you can easily level your Bed while printing the Grid...

The Grid is 280x280mm so u can use an pre-oultline with max 10mm distance to the print Object.

Be carefull with your Glass Clips!