Thingiverse
CR-10 heatbed cable guide
por pixdamix
6
Descargas
4
Likes
0
Makes
Gently guides the heatbed cable over the frame corner.
Two version are available:
- Non Threaded
- Threaded : Choose the threaded one if the extremity of your aluminum is tapped
You'll need either one or two M5 T-nut depending on the selected part and two M5 screws.
If you use Slic3r, you can use `Split to Part` to select the internal holes and adjust finely the infil
Source: [Onshape](https://cad.onshape.com/documents/5940daf5d776800f79996383/w/3ddcd8f8ab3ff20e3901d2b6/e/73dab47bbc7af03f98088cb0)
Two version are available:
- Non Threaded
- Threaded : Choose the threaded one if the extremity of your aluminum is tapped
You'll need either one or two M5 T-nut depending on the selected part and two M5 screws.
If you use Slic3r, you can use `Split to Part` to select the internal holes and adjust finely the infil
Source: [Onshape](https://cad.onshape.com/documents/5940daf5d776800f79996383/w/3ddcd8f8ab3ff20e3901d2b6/e/73dab47bbc7af03f98088cb0)
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
