CR-10 simple brace

Update 2018-07-09: tube_end.step uploaded for those who needs to modify for your tube

This is a redesign of : https://www.thingiverse.com/thing:2681839

Instead of carbon fiber tubes, this uses 1/2 inch aluminum tubes that are readily available in most hardware shops. Beefier brackets.

Parts printed without support at 0.16, 100% infill using PLA

Materials:
2x bracket
4x tube_end
2x 1/2 inch aluminum tube 58cm
6x m5 16mm
4x m5 T nut
2x m5 30mm
2x m5 nut, locking type recommended
epoxy : http://www.lepage.ca/en/lepage-products/epoxy-glue/marine-epoxy.html

Optional (painting):
spray paint, your choice of color
self etching primer : https://www.rustoleum.com/product-catalog/consumer-brands/auto/primers/self-etching-primer/

Installation :
1) at one end of the tubes, glue tube_end about 35mm in, wait until glue sets
2) install brackets, tap frame m5 holes
3) once the glue has set on one end, glue tube_end to the other end and install to the brackets and frame