Thingiverse

CR-10 Storage drawer

by leplubodeslapin

1.8k Downloads

1.2k Likes

8 Makes

Go to Model

This storage drawer is inspired by the one created by Shatterbrain :
https://www.thingiverse.com/thing:2612534/files

I also made a version for 608 bearings in case you have these :
https://www.thingiverse.com/thing:4429253

---

This thing will stand up your printer control box and has some storage abilities.
You can print all the parts with a Creality CR-10/CR-10S, and you'll need to buy :
- 8 bearings (outside diameter : 16mm, inside diameter : 5mm, width : 5mm)
- 8 M4x6mm screws
- 8 M4 washers
- 8 M4 nuts

I got the screws/washers/nuts in this box :
https://www.amazon.com/Stainless-Assortment-Box%EF%BC%8CThree-Wrenches-Included/dp/B071KBVZVV/

You can re-use the rubber feet from the control box for the legs, this might help to reduce vibration noises.

I hope someone will print this ! Please tell me !! :)

CR-10 CR-10s CR10 cr10s Creality Creality CR-10 drawer shelf storage CR-10 CR-10s CR10 cr10s Creality Creality CR-10 drawer shelf storage CR-10 CR-10s CR10 cr10s Creality Creality CR-10 drawer shelf storage CR-10 CR-10s CR10 cr10s Creality Creality CR-10 drawer shelf storage

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format