CR-10 V2 BL Touch Mount
door tinymachines3d
139
Downloads
82
Likes
1
Makes
Until the metal mount is out, this is plenty strong and captures 2, M3 nuts. Printing in PLA or PETG is fine.
This mount requires no shims with the stock CR-10 V2 hot end. It positions the probe perfectly and our firmware has a CR-10 V2 / BL Touch toggle.
Hex file is in the files section
Source Code
https://github.com/InsanityAutomation/Marlin/tree/CrealityDwin2.0_Bleeding
This mount requires no shims with the stock CR-10 V2 hot end. It positions the probe perfectly and our firmware has a CR-10 V2 / BL Touch toggle.
Hex file is in the files section
Source Code
https://github.com/InsanityAutomation/Marlin/tree/CrealityDwin2.0_Bleeding
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!