CR-10S ATX Conversion V2

3D printed solution to incorporate an ATX power supply and a single 120mm fan to cool down the motherboard + raspberry Pi setup for the the CR10S.

- M3 Screws will be required (about 20 of them),
- Zip ties are used to secure the ATX to the ATX holder (B),
- the rear 20x20 (lower back transversal) bar has to be unscrewed in order to slide both the main body and the ATX holder into the 40x20 longitudinal bars. The ATX holder must be placed on the R/H side, and the main body to the L/H side,
- Both ATX holder and main body can be secured in place using the 2 dedicated threaded holes on the side (A),
-The motherboard holder has been designed to be interchangeable for future upgrade,
- https://www.thingiverse.com/thing:3369882 file required to hold the Raspberry Pi3 in place.