CR-10s Standalone Printer Base Remixed

*update*
Added a titan extruder, petsfang direct drive mount, and pei sheet.

I have been using this setup for a few weeks and I like it very much. I used ABS plastic sheeting and it looks really good and is very light. I moved the panels so the connectors and power come out of the back and remixed a panel with no holes to go around the base.

I want be able to access the internals easily/quickly so I keep the back panels m4 nuts disconnected on top then I just remove two m5 screws in the bottom rail and pull the base out.

I included all the stl files I used/remixed! Just some notes on the stl's:

The melzi and mosfet mounts work with m3 screws between 4mm and 12mm.

The pi mount is snap on.

The spool holder remix mount works with the stock spindle and can be mounted horizontally for taller prints.

The power panel is updated for use with the type below and uses 2 m5 screws on either side to mount.
https://www.amazon.com/gp/product/B00ME5YAPK/ref=oh_aui_search