Thingiverse
CR-10S Up Front Camera Mount
von gen3eng
0
Downloads
0
Likes
0
Makes
My previous camera mount broke and I came up with a cleaner design.
This mounts on the front Y belt pulley and provides a front and center view of the printer.
I printed in PETG. To keep the two pieces held securely, I put washers in between the segments.
Spacers are included to allow a longer screw to be used on the pulley mount.
The camera I used is a Logitech C615. It attaches with a 1/4" threaded bolt.
For orientation and assembly see the pictures.
This mounts on the front Y belt pulley and provides a front and center view of the printer.
I printed in PETG. To keep the two pieces held securely, I put washers in between the segments.
Spacers are included to allow a longer screw to be used on the pulley mount.
The camera I used is a Logitech C615. It attaches with a 1/4" threaded bolt.
For orientation and assembly see the pictures.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
