Thingiverse

CR-6SE Direct Drive Conversion

by BostonBowser

138 Downloads

67 Likes

1 Makes

September 21st, 2020 Update:

I've added files for a cable guide. You need to print the Cable Guide and Cable Guide Stud. Print in the orientation they import in. There are no special settings to consider. You need a M3 hex nut and a M3x12 socket head cap screw. Installs on the far left hexagonal cutout above the cover for the X-axis pulley.

A filament spool holder with filament runout sensor is in the works.

September 16th, 2020 Update:

I've added a file named "Base Plate(no dd)" for those who don't want to convert to direct drive, shave a few grams off the weight of their X axis assembly, and upgrade to a 5015 radial fan. Follow the same steps noted below, just omit the steps pertaining to the direct drive conversion, omit an M3 hex nut and the M3x12 screw, and swap the M3x50 screw for an M3x40 one.

This is a direct drive conversion for the Creality CR-6SE.

Keep in mind that this isn't a beginner level modification and that this will void whatever warranty your m

5015 CR-6SE cr6se Creality custom direct drive extruder extrusion fan hotend mod mount print radial retraction 5015 CR-6SE cr6se Creality custom direct drive extruder extrusion fan hotend mod mount print radial retraction

Source

Thingiverse

What you need to print this: Intermediate Low confidence

Single piece Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format