CR10 pi camera bed mount

This pi camera mount is designed to mount directly to the bed of a CR10 printer.

Remove the bed level screw to install the base. It has a cut out that will fit the oem bed level springs. The spring will hold this stable enough to keep the camera from moving while also giving it the ability to flex if it gets hit on accident.

The base can easily be pivoted from side to side to get the angle you want.

Just add an M8 threaded rod that is the height you desire and lock in with the locknuts.

The camera pivot attaches with either an m4 screw, or an m3 screw with nut.