CR10(s) Enclosure

Enclosure for the CR10(S), but every printer which fits in this size can obviously be placed in the enclosure. Remark for the CR10(S). The maximum height to print is 32cm, due to the width of the enclosure and the raising x axes. If you want to print higher, do one of two things: Remove the top of the enclosure or make the enclosure 3 CM wider. In my case it is too late, because the enclosure is already built.
The enclosure consists of 2 parts. The bottom where the printer stands on and the top.
Main reason for creating two parts, is that the top can be removed for maintenance or placing the printer.
The Sketchup file contains also the parts which you can print yourself. The stands are made of wood, The floor, sides and top of MDF 12mm thick.
For the sizes, see the sketchup file.
In a few days I'll be uploading the remaining STL files for the 3D printable parts.

As window and door I used polycarbonate 3mm thick.
2 times 520 x 520 mm for the sides € 25
1 time 408 x 495 for the