CR10s Direct Drive Conversion Mount

This Mount allows you to move your extruder motor from the Gantry to the X-axis and get rid of most of your Bowden tube. Unplug the extruder motor, remove the motor and mount it in this mount (you will need to make the screw holes a little bigger). re-route the extruder wire to go to the hotend. use about 1.5 inches of PTFE tube to join the motor to the hot end in a nice straight path.
For printing, you will need to reduce your retraction distance to 2mm, but you should no longer have any filament jams due to retracting too far into the cool zone! My print quality has improved significantly since I made this change.
Also I reduced the jerk to 15mm/s for X and Y and, the max acceleration for the X (and Y) axis to 300 from 500 mm/s to make it move smoother.