cr10s5 all in one stand

This is a cr10s5 "all in one" conversion with the quiet drive.

It is not totally perfect on the board and can be modified. suggestions are welcome. The print time is LONG and I needed the s5 to print things, so my notes are not totally perfect.


steps:

1. Print 3 feet and 1 foot with sdcard holder.
2. Print all the other pieces 30% infill and PLA works fine.


(I did not print the display, I had a modified one I used, so if anyone prints it, please tell me if it fits on a standard display.)

What I did is I removed all the bits from the box that a cr10 has. I took pictures so I knew where the wires go and removed all the wires.

I mounted the 2 boards, (see photos) the mainboard and rasp PII board.

I mounted the buck convertor and MOSFIT. (might need wires to extend the run)

Mounted the power connector on the edge.

Connected the buck converter to the power supply and got it to 4.9 volts.

Plugged in the rasp pii and made sure it came online

Connected the