CR6-SE Nozzle Wipe

This replaces the right-hand side glass bed clip. This does not work with the standard CR6-SE screen as the wipe crashes into it.

You will need to find a kitchen brush - the size should be 32x9.5mm around the top of the brush. This is the one I bought; https://www.amazon.co.uk/dp/B08HVP49VX

You need to extend the printer's X max position to 255.

The holes for attaching to the Y platform are tight and should self-tap. I suggest self-tapping them a short depth before attaching the mount to the printer.

Print in a suitable material if you use a hotter bed, I used PLA as I don’t print hotter than 60c.

An example of the g-code to use the nozzle wipe:

[gcode_macro NOZZLE_WIPE]
gcode:
G21 ; set units to millimeters
G90 ; use absolute coordinates
G1 X246 Y30 Z0.0 F5000.0
G1 X247 Y0 Z0.0 F5000.0
G1 X248 Y30 Z0.0 F5000.0
G1 X249 Y0 Z0.0 F5000.0
G1 X250 Y30 Z0.0 F5000.0
G1 X251 Y0 Z0.0 F5000.0
G1 X252 Y30 Z0.0 F5000.0
G1 X253