Creality CFS Drawer Rack

You must print on a larger printer since the side pieces are just over 300mm. (K2 Plus or similar)I did print this in PLA but I might go back and reprint it in ABS/ASA. Print settings were - 3 Walls 15% CrosshatchYou can beef up the infill if you want them stronger.Where the parts screw together or where the drawer slides mount to the printed parts I used heat inserts.Extrusions - 10 - 400 mm extrusions https://www.amazon.com/gp/product/B0CLGXGXTQPrinted Parts - 8 End caps - https://www.printables.com/model/352616-ender-3-2020-end-cap 12 Jointing plates - https://www.printables.com/model/125303-90-degree-joining-plate Fasteners:64 - m4-10mm screws for the jointing plates/drawer slides - https://www.amazon.com/dp/B09R3QHPHX8 - m4 x6mm - https://www.amazon.com/MroMax-M4x6mm-Button-Screws-Plating/dp/B07ZLPJNH32 pairs of 14" drawer Slides - (I have a few left over.) https://www.amazon.com/dp/B07HNJW8NZ16 - M4x6 Heat Inserts - https://www.amazon.com/Printing-M4x6x6mm-Threaded-Embedment-