Thingiverse
Creality CR-8 Inductive sensor holder
von Jubaz
4
Downloads
0
Likes
0
Makes
This is for ---- Creality CR-8 / Afinibot A9 ----
This is a sensor holder for 18mm Inductive or Capacitive sensors.
The sensor holder is mounted under the 2 screws for the hotend shielding.
You will need 2 screws 3x10mm to accommodate for the sensor holder.
Be careful to check that the bottom screw, does not interfere with the x-axis track.
See my other things HERE
This is a sensor holder for 18mm Inductive or Capacitive sensors.
The sensor holder is mounted under the 2 screws for the hotend shielding.
You will need 2 screws 3x10mm to accommodate for the sensor holder.
Be careful to check that the bottom screw, does not interfere with the x-axis track.
See my other things HERE
Jubaz veröffentlicht auch auf
17 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!