Creality Ender 3 Cable chain

You must print the piece labelled ‘cable chain - link’ 15 times

I will release a video of how to install it in a week or two whenever i can.

Unfortunately this doesn't work for the Ender 3 v2. This has been designed for printers that have been converted to direct drive or do not have their extruder in the same place. The only extra hardware you will need is one M6x20 bolt with a nut, it does not need to be this size but if you want to use a smaller nut and bolt you will most likely need to use a washer or 2.

TO INSTALL:

First you must get the piece named ‘cable chain - top bracket’ and place it on top of the bracket where the extruder used to be mounted and place it on top with the 2 cylinders through the holes facing the back of the printer.

Next you must get the piece named ‘cable chain - bottom bracket’ and place it underneath the last piece you mounted with the cylinders passing through the two holes on the side of the piece. Make sure the link on the side of the br