Creality Ender 5 E3D Hemera Mount

Hello Enders

I made this Hemera Adapter for my Ender 5.
The first versions fits thightly, so i just tweaked it a little bit to make it easier to mount.

You have to rotate the upper screws and CHECK your limit switch on the right!!!
It has to be moved invards for a few "mm" so the hemera doesn't chrash while homeing.

I had in mind to mount the Hemera with only one adapter so i don't loose to much space, and i tried to build it as stiff as possible with less material as possible.

The Nozzle should be at the same spot as the original one.


Ver1: Hemera adapter (in blue)
Ver2: Hemera adapter with cable guide (in grey)

Comparison of both so you can see the difference with the Hemera mounted to it.




NOTE:
I didn't test it till now, so feel free to contact me if something isn't as it should.
After the first testfit it seems very promising to me, very tight and without play and because a lot of people are asking for a mount i thought i will give you my solution