Thingiverse
Creality HotEnd Fix
di Elproducts
5.2k
Download
2.4k
Likes
7
Makes
This simple hotend fix for your Creality Ender 3, CR-10 or just about any Creality Printer is based on Luke Hatfield design. I created a thicker washer and explain how to install it in this video:
https://youtu.be/7tCxO17XZtw
Update 6/22/2020:
I added a 3mm and 2mm thick washer to the files for those that find the 4mm I used in the video is too thick. They print fast so you could print all three and see which works best for your setup.
I printed in PLA as the top of the Hot End should never get hot enough to soften or melt PLA.
https://youtu.be/7tCxO17XZtw
Update 6/22/2020:
I added a 3mm and 2mm thick washer to the files for those that find the 4mm I used in the video is too thick. They print fast so you could print all three and see which works best for your setup.
I printed in PLA as the top of the Hot End should never get hot enough to soften or melt PLA.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
