Creality K1 BLTouch Adapter

This is an adapter for the Creality K1/K1max printers to use a BLTouch.It is secured to the toolhead with 2 x M2x12 screws and nuts. Hint:Insert the BLTouch screws into the adapter before securing the adapter to the toolhead with the M2 nuts.Limit the maximum Y coordinate in “printer.cfg” to prevent the BLTouch hitting the back Z axis screw mount .[stepper_y]…position_max:print oriented as shown in the picture (2nd one), no support needed These are the settings I use for the BLTouch in the “printer.cfg” file for my K1 Max:[bltouch]sensor_pin: ^nozzle_mcu: PA9control_pin: nozzle_mcu: PA8pin_move_time: 0.500x_offset: 0.0y_offset: 26z_offset: 0.94speed: 10lift_speed: 10probe_with_touch_mode: truestow_on_each_sample: falsesamples: 3samples_result: averagesamples_tolerance: 0.01samples_tolerance_retries: 5sample_retract_dist: 3 Cable configuration for connecting the BLTouch to the toolhead PCB:(the pins are mirrored)