Creality K1 Riser With Cable Chain Bump

UPDATE 09-08-2024:

I created another version, with a larger cavity for the cable chain.

----------

UPDATE 08-26-2024:

I corrected some measurements, reduced the opening for the Bowden tube passage, added a seal to the back opening of the cover, embedded the cavity for the bump, added a platform for LED tape, and created a file with the entire structure, so it can be printed all at once by those who have a printer with a 330 x 330 area or larger...

I suggest printing in PETG, as the shrinkage of ABS causes changes in the measurements, and PLA softens at temperatures above 50°C.

It is necessary to place supports only in the bump cavity.

----------

Another riser for K1, designed by me, to be printed on a well-calibrated printer, with XY axis compensation for holes and contours. I recommend the Orca Slicer.

There are shims to be printed and placed on the cable chain supports to tilt it slightly upwards.

In the photo, the fits didn't come out perfect because I