Slicer Discord
Creality K1 Speedy Lid Riser multi sectional – 3D-Druckmodell von Thingiverse Thingiverse

Creality K1 Speedy Lid Riser multi sectional

19 Downloads
15 Likes
0 Makes
Zum Modell
TLDR; you'll need;

48 @ M3x4mm screws (button head allen)
4 @ M3x10mm screws (button head allen)
4 @ 6mmx4mm disc magnets
A fair amount of filament...

Print;

4 x PANEL A.stl
3 x PANEL B.stl
1 x REAR CUT OUT.stl
4 x CORNERS.stl
8 x MID CONNECT.stl
16 x CORNER CONNECT.stl

Additionally you might want to print out 4 x SINGLE RISE.stl, which are basically a bigger version of the corner parts, if you want to leave it vented for printing PLA but covered with the lid to prevent dust and foriegn objects from falling in.

The longer read is;

Here is a sectional riser to stop the reverse bowden from rubbing on the lid once you free it from the cable chain, becuase its constraint within the cable chain is detrimental to the otherwise seemingly great printer design and probably why you're looking for this in the first place :)

I designed it to be printed flat on the build plate for best aesthetics, and easiest printing. The corner parts "stand up sideways" on their 45 d
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen