Creality K1C CFS Buffer Mount

Design ConceptI designed this buffer mount for my K1C to remove the need for the coupler (reduce friction). It uses existing holes on the rear.PurposeReduce friction.Printing TipsI used PLA as it's outside the heated bed chamber. 15% infill.Assembly InstructionsOnce printed, fit the bracket to the printer using the two small black screws pictured (you'll have a few hanging around after fitting the upgrade kit). Then secure the buffer to the bracket using two M3 x 8mm bolts. You might need to run a 3.0mm tap to clear the threads post-print.