Creality K2 Plus Lid-Raiser

This is only a beta.Print on own risk :D FRAME: 0.2 Layerhight3 WallsSupport :Tree ( on buildplate only)Brim 5 Vent:use a very small layerhight or adaptiv layerhight( i used adaptiv ) because of the very small threads. Install: befor you slide the 4 Frame parts together make sure the Vents are in. There is one long and one short Vent per Frame part. After you installed the vents screw in the screwpins and secure it with glue so it dont brake so easy. (make sure the threads work befor glue) now you can glue in the LEDs , sit it on your printer, unplug the front led and plug your led-conector in. For the Led strips i used 8mm COB LED 24V1,25mm JST 2-PIN Conector