Thingiverse
Creality Modular E3D v6 Optimized Airflow Mount_v2
di Nerdhector
9
Download
10
Likes
0
Makes
This is still a WIP! Additional mounting options and support for other part cooling solutions will be added in the near future, so if you plan on using a 5050 partcooler, a BLTouch or similar soon, dont print this yet.
I ran into heat creep issues while using the heavy duty e3d v6 mount (
https://www.thingiverse.com/thing:2494642
) when running at high temperatures for several hours. The reason was that the air that is supposed to cool the heatsink gets trapped between the x-carriage and the heatsink mount.
In order to resolve this, I remixed the mount with the heatsink fan on the side. Consequently the part cooling fan now has to be mounted at the front, in order to not block the air again.
To ensure that the heated air from the heatsink doesn't blow back on the print I added an airguide at the exit, pushing the air up and away from the print.
In addition to that the new part cooler now uses a standard 40mm fan, which provides quieter cooling compart to radial fans. The i
I ran into heat creep issues while using the heavy duty e3d v6 mount (
https://www.thingiverse.com/thing:2494642
) when running at high temperatures for several hours. The reason was that the air that is supposed to cool the heatsink gets trapped between the x-carriage and the heatsink mount.
In order to resolve this, I remixed the mount with the heatsink fan on the side. Consequently the part cooling fan now has to be mounted at the front, in order to not block the air again.
To ensure that the heated air from the heatsink doesn't blow back on the print I added an airguide at the exit, pushing the air up and away from the print.
In addition to that the new part cooler now uses a standard 40mm fan, which provides quieter cooling compart to radial fans. The i
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
