Creality Scan Bridge - TPU Base Case

ATTENTION: Please take note on how to mount this item correctly, the bridge need to retain the ventilation underneath!This is a protective TPU case for the Creality Scan Bridge.Mounting: The part is printed up-side-down on the build plate to eliminate the need of support.The four raised feet should be positioned downwards, to allow airflow to the bridge's vents when placed on a surface.It has 1.6 mm thick walls that protects the bottom of the bridge from daily wear.The fit is snug intentionally to make sure it wont pop of on its own.It is made to be printed in a TPU 95A Shore A hardness.The filament used in the pictures is Polymaker PolyFlex TPU95 Orange.Please note that if printing this item, make sure the TPU is properly dried, and use a build plate that you are familiar with when using TPU.Bambu Textured PEI Plate does give a great texture to the case, but it's _VERY_ difficult to remove, you need to heat the bed to 80-85C after print has finished, and then pull hard but car