Creality Space Pi Plus ventilation regulator

When drying some filaments (especially on cardboard spools), I noticed that high humidity can remain high for a long time, but when we open the dryer cover, it begins to drop quickly, as if the precipitated moisture had no way to escape. In order not to have to look for objects that could be placed between the base and the lid of the dryer, I created a regulator that allows you to adjust the gap from 0 to 4.5 mm. The regulator should be mounted using plastic screws that are 5mm longer than those that attached the opening handle(2x plastic screw 3x12mm AN171) The regulator should be printed from PETG, ABS, ASA or other material with a softening point above 70 degrees.Boost MeIf you like it, please give it a Boost! If you have any comments, please leave a comment..