Crimson Destiny 2

This is a Crimson Hand cannon from Destiny 2. I did my best to make it as printer friendly as possible. Keep in mind there are a lot of parts and may be challenging to assemble for some (I HAVE FAITH IN YOU, YOU CAN DO IT !). Everything is oriented in the proper position for best results in silk filament with speeds reduced for shiny prints. This model will need supports and everything should be ready to print in the 3mf files. I implemented slide pins to help line up parts and butt them up as close as possible. Please dry fit all parts before gluing in place. When barrel is assembled properly, it will spin and slide out the side as a revolver should. Please refer to pictures provided to help in assembly and refer to photos below to help with assembly of barrel and stand. I used a M3 25 screw, to screw in to barrel. Please note i used a spacer that was 1.5mm long (photo below) that is not included in file, please check print profiles, there are 3 different sizes find the one that works