DnD TTRPG Crocodile Miniature

A Like, Rating or Comment is a huge help and I really appreciate all of it. 🙏 ==========================================================DnD TTRPG Crocodile MiniatureHiding just beneath the murky water, the crocodile is a massive, scaled reptile, its low-slung body and patient stillness masking a terrifying burst of speed and power. Its massive jaws, lined with rows of crushing teeth, snap shut with lethal force, dragging unfortunate prey beneath the surface to a watery grave.Nozzle: 0.4 Layer Height: 0.08mm**This print has been tested multiple times on an X1C and P2S successfully, results may vary if printed on a different printer (bedslinger or another CoreXY)**Post Processing: Use thin tweezers to Pull supports down and out after cutting from the brim/base first. Be careful around the claws, as they're thinner. These just need extra care and patience. Some smoothing (sanding etc) after the supports are removed, may be required. Assembly: This model comes in 2 Parts that need to be glued together. Glue Part A and both Parts of B with glue like Crazy Glue. After gluing may require some miniature filler prior to painting.Housekeeping: Make sure your printer is Calibrated, Build Plate washed and Filament Dried so the supports have the best adhesion possible. Let the miniature fully cool down before removing supports.