Crocodile Prusa Edition

The friend of your printer
Assembly
Step 1 - Tools necessary for this chapter
* Needle-nose pliers for magnets
* 2.5mm Allen key for M3 screws
Step 2 - preparing the components
* Prepare following parts to build the crocodile:
* Printed parts (6x), use PET-G, 0.2mm, 15% infill, no supports
* M3x40 screw (2x)
* M3n nut (2x)
* 10x6x2mm magnet (2x, optional)
* 20x6x2mm magnet (1x, optional)
* 8mm steel ball (2x, optional)
Step 3
* Insert two M3n nuts into the crocodile`s right hand and leg
* Connect two body parts and secure via hands and legs with M3x40 screws, don`t use excessive force.
* Don`t mix left and right hands and legs, otherwise you`ll have one ugly crocodile ;)
* Insert 20x6x2mm magnet into the slot as shown, use Allen key to align the magnet inside the slot
* Insert two 10x6x2mm magnets into slots on the upper side of the head
* Insert two (eye)balls into holes, they will be held by the magnets
Installation
Place the crocodile onto the top of one of the