MakerWorld
Hueforge & Lithophane
Model downloaden
Crow hueforge
6
Downloads
12
Likes
1
Makes
the crow hueforged Print at 100% infill with a layer height of 0.08mm with a base layer of 0.32mmThe Model is 130x130mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2mmFilaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to BlueAt layer #10 (0.88mm) swap to BeigeAt layer #15 (1.28mm) swap to OrangeAt layer #16 (1.36mm) swap to YellowAt layer #17 (1.44mm) swap to Jade White for the rest.
Michele MM3D publiceert ook op
423 extra modellen op 1 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
