Crowntail Betta | HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.4mm The Model is 75.32x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used:PLA BambuLab Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #6 (0.8mm) swap to Blue GrayAt layer #7 (0.88mm) swap to RedAt layer #15 (1.52mm) swap to White for the rest.