Crusader (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu White Transmission Distance: 5 Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Grey At layer #10 (0.88mm) swap to White for the rest. Remember if you sant to scale, do it only with x and y axis, z must be the same as original.